Device Firmware Updates - DNS v6

Doric Lenses provide different electronics device based on micro-controllers or FPGA that can be updated via firmware updates to profit of all new features we add to software.

It is important to verify that your hardware model is compatible with firmware update.  In doubt, please contact our technical support.

IMPORTANT NOTE :

  • Please read the procedure before to proceed with firmware update.
  • It is highly recommended to use a computer running on Windows 10 to perform firmware updates.
  • It is mandatory to have only one (1) Doric device connected to the computer when doing firmware update to avoid possible conflict when erasing device programming.
  • First step is to install latest version of Doric Maintenance Tool that is included in the Doric Neuroscience Studio.
  • Firmware update is a critical operation, as it could make the device unusable if the programming is not done correctly.
    We offer technical support to help during firmware update via remote control session.
    Don't hesitate to contact us to schedule a remote session.

 



Light Source

This firmware package is compatible with the following devices :

  • LEDD : LED Driver (serial # > 70000)
  • LEDFLS : LED light source (serial # > 70000)
  • LDMD : Laser Diode Module Driver (serial # > 70000)
  • LDFLS : Laser Light Source (serial # > 70000)
  • Ce:YAG : Ce:YAG driver (all versions)
  • LISER (all versions)

NOTE : LEDRVP is not supported with Doric Neuroscience Studio version 6. Please do not try to update its firmware programming.

Device Firmware Current Version File Extension
Download .zip
 Motherboard  3.2.2 .hex download
 Channel 5.4.4 .hex
* updated 2023.03.06

Fiber Photometry Console

This firmware package is compatible for the following devices :

  • FPC : Fiber Photometry Console (all versions)
Device Firmware Current Version File Extension
Download .zip
 Motherboard  3.2.0 .hex download
 Channel 2.1.10 .mcs
* updated 2022.03.18

Bundle Fiber Photometry Driver

This firmware package is compatible for the following devices :

  • BFPD : Bundle Fiber-Photometry Driver (all versions)
Device Firmware Current Version File Extension
Download .zip
 BFPD 5.15 .hex download
* updated 2023.03.06

Optical TTL Pulse Generator

This firmware package is compatible for the following devices :

  • OTPG-4 Gen.1 (before 2017-11)
  • OTPG-4 Gen.2 (after 2017-12)
  • OTPG-8 (all version)
Device Firmware Current Version File Extension
Download .zip
OTPG-4 Gen.1 (serial # < 69999-99) 2.4 .hex Not supported
 OTPG-4 Gen.2 (serial # > 70000-00) 5.15 .hex download
 OTPG-8 5.15 .hex
download
* updated 2023.03.06

Behavior Camera

Device Firmware Current Version Download .exe
Cam33U (USB3) Driver 5.0.1 download
GigE Camera Driver (IP_config) 3.7.1 download