LED Fiber Light Source

-
The LED Fiber Light Source is an assembly of 1, 2, or 4 independent LEDs and their driving electronics into a compact housing. Each LED has its own output FC connector. The functionalities and software of Doric LED Fiber Light Sources are identical to those of LED Drivers. When ordering multi-channel models, any combination of LED wavelengths can be chosen.
Note:
AC/DC power supply is supplied to match customer location electrical outlet standard. -
Operating Modes - OFF
- Continuous
- External TTL
- External Analog
- Computer (USB)TTL Modulation
HI > 2.8 V
LOW < 2.3 V
Analog Modulation 400 mA / V
* 40 mA / V in low power modeOutput - LED supply M8 4-pin female Output Current 40 - 2000 mA
* 4 - 200 mA in low power mode
** 0.000 mA when OFF or V-IN < 0.1 V
Max Forward Voltage 7 V Rise / Fall time < 10 µsec Max modulation frequency 50 kHz Dimensions
175 mm x 50 mm x 105 mm (1-ch)
234 mm x 50 mm x 105 mm (2-ch)
350 mm x 50 mm x 105 mm (4-ch)
Mass 580 g (1-ch)
757 g (2-ch)
1155 g (4-ch) -
* updated 2021-02-25
LED Typical Output Power
@ max current
[ mW ]overdrive (pulsed)† Central Wavelength
[ nm ]Bandwidth FWHM
[ nm ]fiber
200 µm
0.53 NAfiber
400 µm
0.53 NAfiber
960 µm
0.63 NA365 ~ 12 6.0 23 100 -
385 ~ 12 6.0 23 100 -
405 ~ 15 5.0 20 80 -
420 ~ 15 5.5 23 100 -
450 ~ 25 8.0 23 100 x1.7 465 ~ 25 8.5 30 140 -
505 ~ 30 3.0 12 50 x1.6 515 ~ 40 3.0 9.5 40 x1.5 560 ~ 100 2.0 8.5 40 - 595 ~ 20 2.0 8.5 40 x1.2 625 ~ 20 3.5 14 70 x1.6 635 ~ 20 6.5 25 100 -
840 ~ 35 6.0 22 40 - 940 ~ 35 2.0 10 40 - 5500K - 4.5 17 80 -
-
LED Fiber Light Sources
- User Manual
1 LED Fiber Light Source
- Drawing
2 LED Fiber Light Sources
- Drawing
4 LED Fiber Light Sources
- Drawing
- choosing a selection results in a full page refresh