Low-Autofluorescence Bundle Branching Fiber-optic Patch Cord
The Low Autofluorescence Bundle Branching Fiber-optic Patch Cord has two or more optical fibers bundled into a single optical connector on one end and individual connectors for each fiber on the other end. It uses low autofluorescence materials and black epoxy to prevent the signal crosstalk between the optical fibers. These patch cords are primarily used in multi-site fiber photometry.
Before delivery, each patch cord undergoes a photobleaching process that further decreases its natural fluorescence.
Please note that there may be some limitations on the choice of optical fiber, connector type, or the number of branches.
Buffer NA Fiber-optic Code* 200 220 245 0.37 200/220/XXX-0.37 200 230 500 0.57 200/230/XXX-0.57 400 440 470 0.37 400/440/XXX-0.37 400 430 730
*XXX is representative of the jacket code, see the JACKETS CODE tab to choose the best one for your needs
Comparison Table : Protective Jacket Code Description Color OD
Flexibility Fiber break protection Fiber pull protection Proposed usage 900 Hytrel loose tube 0.9 Black* 0.9 0.5
Cable to small freely-moving animal (mice) 1100
Hytrel loose tube 1.1 mm
Black* 0.9 0.5 Excellent
Low Cable to small freely-moving animal (mice) 3000 PVC jacket 3 mm Black 3.0 5.8 Low Good Excellent General use cable LWMJ Stainless monocoil with PVC 2.4 mm Black 2.4 7.5 Good
Good Freely-moving animal light delivery with large mice or rat PKMJ
Stainless monocoil with kevlar and PUR 3.0 mm
Black 3.0 11 Good
Excellent Best compromise between flexibility and robustness ARMO Stainless armor 2.3 mm Silver 2.3 9.2 Low Excellent Excellent Preferred for maximum robustness ARBK Stainless armor with PVC 3 mm Black 3.0 15 Low Excellent Excellent Preferred for maximum robustness
* Other color available on request.
Jacket availability may vary with optical fibre type
Description Product Termination Code FC Connector with Zirconia Ferrule
FC Connector with Metal Ferrule
SMA Connector with Metal Ferrule SMA Zirconia Ferrule OD 1.25 mm ZF1.25 Zirconia Ferrule OD = 1.25 mm with Flange
Zirconia Ferrule OD = 1.25 mm with Peek Flange
Metal Ferrule OD 1.25 mm MF1.25 Metal Ferrule OD 1.25 mm with Flange MF1.25(F) Zirconia Ferrule OD = 2.5 mm ZF2.5 Zirconia Ferrule OD = 2.5 mm with Flange
Zirconia Ferrule OD = 2.5 mm with Peek Flange
Metal Ferrule OD = 2.5 mm MF2.5 M3 Connector CM3 M3 Connector Peek Plastic CM3(P)
Low Autofluorescence Patch Cords Application_Note
- Application Note
- choosing a selection results in a full page refresh