Connectorized Laser Diode Modules

CLDM
  • Unit price per 


Ordering Code:
  • Excluding base plate and electric pigtail, the module size is 24.6 x 36.8 x 12.0 mm3. The base plate is used as a passive heat sink and can be used to secure the module to an optical table for an even better thermal stability. The module connects only to Doric Laser Diode Module Driver over the M8 electrical pigtail. Each module contains an EPROM memory allowing the Driver to recognize the device and set the corresponding maximum current, preventing accidental overdrive of the laser diode by the user.

    The CLDM's driver (LDMD) can be controlled using the Doric Neuroscience Studio, allowing more complex forms of control than through standalone use.

  • Optical Fiber Connector FC/APC
    Optical Fiber Type
    Multimode 50 μm core - NA 0.22 (or larger)
    Optical Power
    see power table
    Maximum Current see power table
    Electrical connection 1 meter long pigtailed cable M8 connector 4 pos - Male
    M8 Pinout - Male
    Laser Safety  Class 3B
    Dimensions 64 x 56 x 22 mm including connectors
    Mass 104 g
  • * Power coupled into 50 μm core, NA 0.22 optical fiber.
    Wavelength
    [ nm ]
    Bandwidth [nm] Threshold current
    [ mA ]
    Maximum current
    [ mA ]
    Optical Power*
    [ mW ]
    Code

    405 <3 50 150 100 405/100

    450 <3 20 110 75 450/075

    473 <3 20 120 70 473/070

    488 <3 25 80 50 488/050

    520 <3 45 200 60 520/060

    638 <3 50 150 80 638/080

    638 <3 75 220 120 638/120
  • Drawing

    Connectorized Laser Diode Modules

    User ManualFrEn

    Connectorized Laser Diode Module and Driver

    Application NoteFrEn

    Laser Safety Information