Cart 0

Connectorized Laser Diode Modules

CLDM


Ordering Code:

 

  • Doric Connectorized Laser Diode Modules is a compact laser diode source with FC/APC receptacle to use with multimode optical fibers. The module size is 24.6 x 36.8 x 12.0 mm3. The base plate is a passive heat sink and can be secured to an optical breadboard for better thermal stability. The CLDM module connects only to Doric Laser Diode Module Driver over the M8 electrical pigtail. Each CLDM module contains an EPROM memory allowing the Driver to recognize the device and set the corresponding maximum current, preventing accidental overdrive of the laser diode.  If the CLDM is not recognized, do not use it and contact us for technical support.

    The CLDM's driver (LDMD) can be controlled using the Doric Neuroscience Studio, allowing more complex forms of control than through standalone use.

  • Optical Fiber Connector FC/APC
    Optical Fiber Type
    		 Multimode 50 μm core - NA 0.22 (or larger)
    Optical Power
    		 see power table
    Maximum Current see power table
    Electrical connection 1 meter long pigtailed cable M8 connector 4 pos - Male
    M8 Pinout - Male
    Laser Safety  Class 3B
    Dimensions 64 x 56 x 22 mm including connectors
    Mass 104 grams
  • * Power coupled into 50 μm core, NA 0.22 optical fiber.
    † The maximum current is an absolute maximum rating. Exceeding this value will cause permanent damage to the diode.
    Wavelength
    [ nm ]    		 Bandwidth [nm] Threshold Current
    [ mA ]
    		 Maximum Current †
    [ mA ]
    		 Optical Power*
    [ mW ]    		 Code

    		405 <3 50 150 100 405/100

    		450 <3 20 110 75 450/075

    		473 <3 20 120 70 473/070

    		488 <3 25 80 50 488/050

    		520 <3 45 200 60 520/060

    		638 <3 50 150 80 638/080

    		638 <3 75 220 120 638/120
  • Drawing

    Connectorized Laser Diode Modules
    User ManualFrEn

    Connectorized Laser Diode Module and Driver
    Application NoteFrEn

    Laser Safety Information