Cart 0

Optoelectric Probe Tips

Optoelectric Probe Tips
Optoelectric Probe Tips
Optoelectric Probe Tips


Ordering Code:

  • Like optical probe tips, the optoelectric probe has an optical fiber of the specific NA and core diameter with M3 connector at one end while its loose end is much longer and suitably protected and strengthened to keep its direction. In addition, this probe has electrical wire that goes along the optical fiber, from near the tip to the groove in zirconia ferrule. 

    Note: The electrode protrusion length is the distance in nm between the fiber tip and the electrode tip. Positive means the electrode is longer.

  • DESCRIPTION Impedance
    (Ohm)    		 RECOMMENDED USE CODE
     50 µm tungsten wire with flat tip  0.1 to 0.5 M  LFP W50-FLT
     50 µm tungsten wire with 45 deg angled tip  0.1 to 0.5 M  LFP W50-A45
     75 µm tungsten wire with tapered tip  0.1 M  LFP 0.1M-75
     0.5 M  LFP 0.5M-75
     1.0 M  Multi unit 1.0M-75
     1.5 M  Multi unit 1.5M-75
     2.0 M  Single and Multi unit 2.0M-75
     2.5 M  Single and Multi unit 2.5M-75
     3.0 M  Single unit 3.0M-75
     5.0 M  Single unit 5.0M-75
     125 µm tungsten wire with tapered tip  0.1 M  Deep Chronic implant, LFP 0.1M-125
     0.5 M  Deep Chronic implant, LFP 0.5M-125
     1.0 M  Deep Chronic implant, Multi unit 1.0M-125
     1.5 M  Deep Chronic implant, Multi unit 1.5M-125
     2.0 M  Deep Chronic implant, Single and Multi unit 2.0M-125
     2.5 M  Deep Chronic implant, Single and Multi unit 2.5M-125
     3.0 M  Deep Chronic implant, Single unit 3.0M-125
     5.0 M  Deep Chronic implant, Single unit 5.0M-125
  • Fiber Optic Codes for Cannulas
    Core Diameter (μm) Outer Diameter (μm NA Buffer Color Outer Layer Fiber-Optic Code
    50 70 0.22 Yellow Polyimide buffer 050/070-0.22
    60 75 0.37 Yellow Polyimide buffer 060/075-0.37
    100 125 0.22 Yellow Polyimide buffer 100/125-0.22
    100 125 0.37 Yellow Polyimide buffer 100/125-0.37
    100 125 0.66 Clear Borosilicate (Fragile) 100/125-0.66
    200 240 0.22 Yellow Polyimide buffer 200/240-0.22
    200 245 0.37 Yellow Polyimide buffer 200/245-0.37
    200 250 0.66 Clear Borosilicate 200/250-0.66
    300 370 0.22 Yellow Polyimide Buffer 300/370-0.22
    300 360 0.37 Yellow Polyimide Buffer 300/360-0.37
    400 480 0.22 Yellow Polyimide Buffer 400/480-0.22
    400 470 0.37 Yellow Polyimide Buffer 400/470-0.37
    400 430 0.66 Clear Borosilicate 400/430-0.66
  • Optoelectric Probe Tips
      Drawing